Home Automation and Smart Home Systems
www.control4.com
A home automation system from Control4
can turn your home into a smart home.
Control4 KMtronic Web Temperature Monitor Driver by Soft.Kiwi
Driver features
Support for up to 4 DS18B20 sensors.
Connection to the free Yatun software thermostat driver.
Integration of the temperature measure as a Control4 variable.
Driver Manual:
http://c4.soft.kiwi/documents/Manual_KMtronic_Temperature_v1.0.pdf
More information:
http://c4.soft.kiwi/kmtronic.html
Control4 KMtronic Web Temperature Monitor Driver by Soft.Kiwi
Driver features
Relay integration as connections with trigger and toggle functions.
Support for multiple relay boards connected to the same C4 control unit.
8 TCP/IP controlled relays (250VAC/10A or 125VAC/15A).
Driver Manual:
http://c4.soft.kiwi/documents/Manual_KMtronic_Realys_v1.0.pdf
More information:
http://c4.soft.kiwi/kmtronic.html
KMtronic RS232 Relay Board Control4 Driver License by T4Control
Driver features
This driver allows you to control the 8 relay device from KMTronic in the Control4 System. With bindings for the 8 relays, simply connect to the Generic Relay driver you want to use and from the Control4 UI you will be able to open and close each zone.
- Free 24 hour trial period - no license key needed!
- 8 relay bindings for individual control
- Easy to use, simply connect via RS232 or IP
- Relay state variables for enhanced programming capabilities
This driver allow you to control the 8 relay device from KMTronic
All the relay control is done by executing commands.
Use the Programming tab on Composer to execute the commands.
Compatibility:
--------------
KMTronic LAN Board:
+ compatible with all Control4 controllers
KMTronic RS232 Board:
+ compatible with HC-250 and IO Extenders
+ Problems reported on HC-800 controllers.
Properties:
-----------
- Connection Type: shows the current control port (SERIAL or IP). This is set by connecting the RS232 port. If the port is not connected the driver is set on IP mode.
- Web Address: url of the LAN board. Format: http://BOARD-IP (LAN BOARD ONLY)
- Login: credential to access board web page (LAN BOARD ONLY)
- Password: credential to access board web page (LAN BOARD ONLY)
- Pool Interval (s): interval in seconds to pool the current relays state. 0 seconds disable the pooling (LAN BOARD ONLY)
- Normal state of the relays: set the state CLOSED or OPENED for the relay when it has no power on it.
- Debug Mode: set to print and send the information to the developer in order to troubleshoot
Commands:
---------
- UPDATE_STATUS: get current relays state (LAN BOARD ONLY)
- ALL_RELAYS_COMMAND: change the state of the 8 relays at same time.
Usage Instructions:
--------------------
1) Connect the RS232 to use serial port (Serial boards model) or do not connect for IP boards.
2) Connect the relays to this driver
3) Control the relays via programming or MyHome application
Variables:
----------
- RELAY1_STATE to RELAY8_STATE: current relay state (CLOSED or OPENED)
Developer:
----------
T4Control Inc.
www.t4control.com
More information:
https://www.houselogix.com/shop/kmtronic-8-relay-board-control4-driver-license
